$ 423.15
Details
Tubing ext.Ø: 0.462", Tubing int.Ø: 0.188", Wall thickness: 0.137", This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., SBE: Y, Durometer Hardness: Shore A, 65, Cat. No.: 89068-426, Tubing ext.Ø: 0.625", Tubing int.Ø: 0.375", Wall thickness: 0.125", This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., SBE: Y, Durometer Hardness: Shore A, 65, Cat. No.: 89068-428, Tubing ext.Ø: 0.990", Tubing int.Ø: 0.625", Wall thickness: 0.183", This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., SBE: Y, Durometer Hardness: Shore A, 65, Cat. No.: 89068-430, This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., Tubing ext.Ø: 0.500", Tubing int.Ø: 0.250", Wall thickness: 0.125", This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., SBE: Y, Durometer Hardness: Shore A, 65, Cat. No.: 89068-410, Tubing ext.Ø: 0.875", Tubing int.Ø: 0.500", Wall thickness: 0.188", This low-volatile grade, platinum-cured silicone tubing is produced in a certified ISO Class 6 (FED-STD-209E Class 1000/M4.5) cleanroom for critical pharmaceutical, biomedical, food, and cosmetic applications., The use of polyester yarn braiding in the tubing wall enhances performance capabilities in elevated pressure applications without compromising flexibility, 04_BodyText: Tubing has undergone extensive physical, chemical, and biological testing and meets USP Class VI, FDA CFR 177.2600, ISO 10993, European Pharmacopoeia 3.1.9., and 3-A standards. Interior silicone is manufactured from NSF 51 listed material., 05_BodyText: Tubing is resistant to temperature extremes, compression set, chemical attack, ozone, radiation, moisture, and environmental exposure. Certified free of animal-derived ingredients. Imparts no taste or odor to critical stream., 02_BulletPoint: Sterilizable by autoclave, gamma radiation, SIP, and CIP processes | Enhanced performance under pressure without compromising flexibility, 13_Caution: Note: Not intended for implantation or continuous steam applications., 10_Ordering: Supplied in 7.6 m (25') lengths. Sealed in polyethylene bags to ensure cleanliness. Quality control and lot traceability identification on bags and boxes. Complete validation package available upon request., SBE: Y, Durometer Hardness: Shore A, 65, Cat. No.: 89068-412
